Product Overview

Carbon is an Excellent Cigarette Smoker Odor Remover. Combined with HEPA, the PR10.0-V will Remove Smells from Cigars, Cigarettes, Hookah, and Marijuana.

650-850 CFM – One PR10.0-V Heavy Duty Flush Mount HEPA & Carbon Smoke Eater covers approximately 4,000 cubic ft.
Includes installation hardware PLUS all filters needed for the first year!

Carbon is a Super-Odor Adsorber – Perfect for Odor Removal in Cannabis Shops, Cigar Bars, Hookah Lounges, and Marijuana Growing Facilities.

The PR10.0-V Heavy Duty Flush Mount HEPA & Carbon Smoke Eater is designed to fit perfectly and discreetly into your drop or suspended ceiling. By replacing one 2′ x 4′ ceiling tile or two 2′ x 2′ ceiling tiles, our flush-mount cigarette smoke odor removal system will combat the strongest of smells. At least 13-inches of clearance above the drop ceiling is required for installation. The weight of the system does not rest on the ceiling tiles or grids but is secured above the suspended ceiling onto a permanent structure such as a joist or beam. All filters on the PR10.0V cigarette smoke eater commercial air cleaner are accessible from the front of the unit. 1 PR10.0-V Heavy Duty Flush Mount HEPA & Carbon Smoke Eater recommended for approximately every 4000 cubic feet.

How does the PR10.0-V Heavy Duty Flush Mount HEPA & Carbon Smoke Eater work?…

In addition to providing a 95% high-efficiency HEPA filter media, The PR10.0-V Commercial Cigarette Smoke Eater utilizes 18 pounds of activated carbon in a V-Bank housing. Since HEPA filters alone cannot remove gases, odors, or particles smaller than .3 microns, activated carbon is a necessary requirement for truly clean air. Activated carbon will adsorb ‘some of almost any gas & odor’. It has a large capacity for organic molecules, especially solvents. Activated carbon is also capable of adsorbing and retaining a wide variety of odors and chemicals – including cigar smoke smells and cigarette smoke odors – and works extremely well under a wide range of temperature and humidity conditions.

Stage 1 – Pre-Filter
The pre-filter is important because not only does it remove the larger particles, it also helps prolong the life of the HEPA filter in the system. Essentially, the pre-filter is the first line of defense in maintaining your system; therefore promoting better indoor air quality.
Twelve (12) Polyester pre-filters are supplied with each system. Pre-filters cannot be washed and must be changed monthly.

Stage 2 – 18 Pound Carbon V-Bank
Carbon is KING when it comes to smoke odors, gas, and chemical removal. The 18 pound Carbon V-Bank Filter in the PR10.0-V is an excellent choice when the need to control tobacco smells is required – including cigar & cigarette odors, and marijuana odors. Activated Carbon removes odors by absorbing gases & VOCs into the porous carbon granules. Think of carbon as an odor sponge. It can hold many times its weight in odor molecules. However, once carbon becomes saturated it loses its efficiency. Thus, proper maintenance of the carbon filter is required to keep your environment fresh & clean smelling.
One (1) 18 Pound Carbon V-Bank is included with each unit. The Carbon V-Bank Filter cannot be washed and should be changed annually.

Stage 3 – HEPA Filter
The HEPA filter removes very small particles, such as smoke from tobacco (including hookah, cigarette, cigar & marijuana smoke), burning wood, oil, rosin, dust mites, spores, mold spores, pollen, spray paint, spray paint dust, ashes, cement dust, auto emissions, textile fibers, fiberglass, hairspray, insecticide dust, copier toner, and most viruses, just to name a few. As you can see, the HEPA filter is an extremely important filter. When used and maintained properly, it will dramatically improve your indoor air quality.
One (1) 6-inch HEPA Filter is supplied with each PR10.0-V Smoke Eater. For best results, the HEPA filter cannot be washed and should be changed annually.

OPTIONAL – Remote Control
Easily control the settings on your PR10.0-V Smoke Eater with a handy Remote Control Key Fob. If your Smoke Eater is installed in an awkward area or is too high to reach, the remote control is an excellent choice. Each receiver is factory installed and comes with 2 battery-operated remote control key fobs. (Multiple air cleaners require a separate receiver/transmitter for each unit.)The receiver/transmitter range is approximately 100 feet under normal operating conditions.

PR10.0V Commercial Cigarette Smoke & Odor Air Cleaner Specifications

Capacity	Up to 4,000 Cubic Feet
2 Speed	High – 850 CFM | Low – 650 CFM
Installation Options	Flushmount – Fits into (2) 2′ x 2′ or (1) 2′ x 4′ ceiling tile
Install by removing a ceiling tile and drop the unit in. The weight of the system does not rest on the ceiling grids but is secured above the suspended ceiling to a permanent structure such as a joist or beam. Installation hardware included – (2) eyebolts, (2) eye lags, industrial hanging wire.
Dimensions	46.5″ (L) x 23.75″ (W) x 12″ (H) NOTE: 13″ clearance above drop ceiling required.
Cabinet Construction	Aluminum – Available in White or Black
Shipping Weight	100 lbs.
Electrical	4.2 amps | 120V
Power Cord	8-foot long, 3-prong grounded plug – Plugin or Hardwire
Three Filter System	Includes 1 Year Supply of Filters; (1) 6″ HEPA Filter – pre-installed (1) 6″ / 18 lb. Carbon V-Bank Filter – pre-installed (12) 1/2″ Pre-Filters – (1) pre-installed
Warranty	1 Year Manufacturer’s Warranty
Certifications	Fan motor and all electrical components are UL Listed and CSA Certified
PR10.0V Owner’s Manual
PR10V Brochure / Cut sheet
This unit has not been tested for compliance with California Air Resource Board requirements and cannot be shipped to California.
This item ships by LTL freight. Please refer to our shipping policy by clicking here.
This unit is NOT a stock item. It’s built to order up and can take up to several weeks to ship. Please consider this when scheduling your project.

Request for Quote

Please complete the following information. We’ll get your quote to you within 24 hours. If you’re not sure about what Smoke Eater(s) you need, we’ll be happy to provide you with a recommendation. You can fill out our Smoke Eater Recommendation form here. You can also use our CFM Calculator to determine the optimal CFM requirements for your specific application.

//