DesignAir Replacement Pre Filter – 41005

DesignAir Electronic Air Cleaner Replacement Pre-Filter

The pre-filter is designed to capture large particles including hair, dust, lint, dander & pollen, so the electronic cell can do its job. Smaller microscopic particles flow through which are captured by the electronic cell. 

To clean the pre-filter, remove and shake out or brush off the accumulated dust and lint. If this is not adequate, a vacuum cleaner may be used or the prefilter can be cleaned with an all-purpose alkaline detergent to remove tobacco smoke and cooking grease stains. Thorough rinsing is required after each cleaning. The pre-filter should be completely dried before inserting it back into the unit. The pre-filter will need to be replaced after repeated washings as the material will naturally begin to deteriorate.

Used in the DesignAir Portable Electronic Air Cleaner